That means the kernel module is loaded and the device works, it also creates the device in devfb0.

Setting VIDEOCARDS to appropriate value(s) will pull in the correct driver(s).

Common choices include nouveau, nvidia, radeon, and intel.

Displaylink Linux Update The System

After setting or altering VIDEOCARDS values remember to update the system using the following command so the changes take effect.

We start two instances of X server for each device and then use a software called x2x to move the input devices between them.

Create and customize the file to your needs, here is an example.

Make it executable and save it somewhere in your home folder, in this example we save it to.displaylink.sh.

If the second screen is not attached, it just fails to do so.

To get the Ethernet port work, you need to activate the following kernel options.

A DisplayLink device. All USB 2.0 and 3.0 devices are supported.

The WEI is accessible from Computer Properties, or from Control Panel System.

The following system specs are recommended minimum: Windows Experience Index: WEI score of at least 3 in the Graphics; Desktop performance for Windows Aero category.

Processor: 1.2 gigahertz (GHz) or faster with support SSE2 RAM: 2 gigabyte (GB) for 1 DisplayLink display.

GB or more recommended for 2 or more DisplayLink displays - Graphics processor: Intel, AMD or NVIDIA GPU supporting Microsoft DirectX 9 or later with a WDDM driver.

Matrox or SiS graphics are not supported.

USB: At least one USB 2.0 or USB 3.0 port.

MB) of free disk space.

Computer screen for use with the DisplayLink device, if it is not integrated.

Network access for software downloads, or access to a CD-ROM drive.

Windows XP Processor: 1.2GHz Single Core CPU or higher RAM: 1GB memory for 1 DisplayLink display.

GB or more recommended for 2 or more DisplayLink displays Graphics processor: Any primary graphics processor or card with XP drivers installed.

Displaylink Linux Windows 7 Windows 8

Operation systems: Windows XP SP3 32bit ( the last release to support Windows XP is 7.6 ) Windows Vista ( the last release to support Windows Vista is 7.7 ) Windows 7 Windows 8, 8.1 Windows 10 DisplayLink software will install on Windows Server 20082008 R2, Windows Server 20122012 R2, Windows Embedded 7 machines and other applications specific versions of Windows.

However DisplayLink does not test or support these platforms.

The PC will start detecting the monitors.

Go your PC settings to configure the monitors for your needs.

Also do ensure that your USB drivers and BiOS as up-to-date as well.

Restart the Laptop and Docking Station.

Follow these steps to enable the display (if the display doesnt work right away) - needs to be done within 30mins of installing the Displaylink Driver: For Mojave Users: For Catalina Users: two steps: 1.

Despite the permission name, DisplayLink driver does not record screen data, but requires that permission to access pixels and send them through USB.

DisplayLink driver still relies on a kernel extension.

This means you will need to allow the extension within 30 minutes of installation in System Preferences Security Privacy General, like with previous versions.

AFTER ANY INSTALLATION: Restart the Laptop and Docking Station.

Restart the computer the USBs should start responding and the Displays would read within a minute.

If USB is still not responding follow Step by step Solution: Question: How to check if the Displaylink kext is blocked on macOS 10.13 or 10.14 Answer: You can check if the DisplayLink Kext is blocked by opening the System Report (Apple menu - About) and select Extensions on the left pane and look for DisplayLinkDriver.kext.

Check the Loaded column.

If this is set to No then the kext is blocked and needs to be enabled Question: How to enable Video Functionality on macOS 10.13 or 10.14 Answer: Please note: Its only possible to enable the system extension in the 30 minutes following the DisplayLink driver installation.

A new installation can be run to reset this timer.

From the Apple menu, choose System Preferences 2.

Follow the instructions on the screen to enable the Displaylink Software to run on the system 4.

Unlock the user authorization.

Click Allow for System Software to activate a developer DisplayLink Corp 6.

When the message The Installation was successful is displayed, click on Restart Button to finish installing the software.

Question: Black Screen or unable to see mousecursor on the connected monitor Answer: Visit link below for solutions based on graphic system on your Mac - click on related links in the article for step by step solutions Question: The screen keeps going blank and recovering repeatedly Answer: Visit link below to fix issues with products repeatedly disconnecting, reconnecting and freezing: For all other issues NOT LISTED BELOW, please visit for solutions or email us at salesmediagearpro.com (give us one business day to investigate) or call 714-564-7719 (Monday-Friday 9.30am-4.30pm PST).

All USB 2.0 and 3.0 devices are supported.

Displaylink Driver Linux